How To Set A Medium / A Device - Kenwood DDX6034M Instruction Manual

How to Set a Medium / a Device

7 Disc media
Press the [0] button to open/close the front
panel.
If a disc is already inserted, it is ejected by
pressing the [0] button.
7 iPod
To disconnect the iPod, stop the playback
by touching the [38] button on the source
control screen, and then disconnect the iPod.
See <Source Control Screen> (page 29).
7 USB device
To disconnect the USB device, touch the [0]
button on the source control screen, and
then disconnect the USB device. See <Source
Control Screen> (page 22).
0
7 SD card (DNX/ DDX7 models only)
For DNX models:
Update the navigation software.
For DDX7 models:
Audio File Listening & Video File/ Picture
File Watching
Press the [0] button for more than 1 second
to open the front panel.
Inserting the SD card
Hold the SD card with the label side up
and the notched section on the right, and
insert it into the slot until it clicks.
Removing the SD card
Push the SD card until it clicks and then
remove your finger from the card. The card
pops up so that you can pull it out with
your fingers.
Press the [0] button to close the front panel.
⁄
• For DNX models:
For how to update the software, refer to the
instruction manual of the navigation unit.
• For DDX7 models:
After inserting the SD card, select the SD source on
the Source Select screen.
⁄
• The playback starts automatically after setting the media
or the device.
Getting Started
English 13