Set Station Name(Region 4/ 6 Models); Traffic Information (Region 2/ 3 Models) - Kenwood DDX6034M Instruction Manual

Radio Listening
Set Station Name
(Region 4/ 6 models)
Assigns a name to a station.
1 Tune in to the station to name
See <Source Control Screen> (page 31).
2 Start Name set
3 Enter the name
See <Character Entry> (page 41) for information
on how to enter a name.
4 End Name set
34 DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M

Traffic Information (Region 2/ 3 models)

When a traffic bulletin starts, any source is
switched to the traffic information and it is
displayed automatically.
1 Display the Source
See <Source Control Screen> (page 31).
2 Set the Traffic information mode
When the traffic bulletin starts...
The Traffic Information screen appears
automatically.
Traffic Information screen
⁄
• It is necessary to have Traffic Information function set to
On in order to have the Traffic Information screen appear
automatically.
• During reception of traffic information the adjusted
volume is automatically remembered, and the next time
it switches to traffic information it's automatically the
remembered volume.
Control Screen