Key Word Voice Registration - Kenwood DDX6034M Instruction Manual

Hands Free Unit Control
5 Utter the voice to register (2nd try)
Utter within 2 seconds after the Beep.
6 End voice registration
⁄
• A message is displayed if the voice is not recognized.
Read the message for the further operation.
• Repeat from 1st try if the voice is different from the 1st
try.

Key Word Voice Registration

Registers the voice to select the Phone number
category by Voice Recognition.
1 Display the Hands Free Setup screen
See <Setting Up the Hands-Free Phone> (page
48).
2 Display the Key Word List screen
3 Select the Phone number category to
register
1 1 1
1 Selects the Phone number category.
"REC" turns on for data with voice for voice
recognition already registered.
50 DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
[Record] Registers voice for the selected
Phone number category.
[Play] Plays voice registered for the selected
Phone number category.
[Delete] Deletes voice registered for the
selected Phone number category. Touch to
display the confirmation screen. Touch [Yes] to
delete or [No] to cancel.
4 Display voice registration screen
5 Utter the voice to register (1st try)
Utter within 2 seconds after the Beep.
6 Utter the voice to register (2nd try)
Utter within 2 seconds after the Beep.
7 End voice registration
⁄
• A message is displayed if the voice is not recognized.
Read the message for the further operation.
• Repeat from 1st try if the voice is different from the 1st
try.