Initial Setup - Kenwood DDX6034M Instruction Manual

Initial Setup

When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is
displayed.
Initial Setup
1 Turns the power On
2 Set each item
[Language] Select the language used for the
control screen and setting items. (page 60)
[Angle] You can adjust the position of the
monitor. (page 63)
[iPod AV Interface Use] Sets the terminal
which iPod is connected. (
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display. (
"ON": Switches to the rear view camera video
display when engaging the shift knob of
car to "Reverse".
"OFF": Switches to the rear view camera video
display when engaging the shift knob
of car to "Reverse" and then pressing
the [AUD] button for more than 1
second.
The function of the [AUD] button needs
to be set to "R-CAM" beforehand. See
<User Interface> (page 60).
[Color] Sets the screen and button illumination
color. (page 66)
[EXT SW] Setting up power specification of
the external device for which the power is
controlled from this unit. (page 63) (DNX/
DDX7 models only)
3
⁄
•
"iPod")
"OFF")
End initial setup
The settings above can be changed in
(page 58).
<Setup Menu>
English 85