Speaker Setup; [Speaker Select] - Kenwood DDX6034M Instruction Manual

Setup Menu

Speaker Setup

You can select a speaker type and its size to get
the best sound effects.
1 Display the Speaker Select screen
>
Touch [ ] [
[Speaker Select]. (page 58)
2 Select a speaker you wish to adjust
When the speaker type and size are set, the
speaker crossover network and equalizer curve
are set automatically.
DNX/ DDX7 models
1 1 1
2 2 2
3 3 3
DDX6 models
1 1 1
2 2 2
3 3 3
Front speaker
1
Rear speaker
2
3 Subwoofer
[Subwoofer] Sets the availability of
subwoofers. (DDX6 models only)
[Tweeter] You can set the tweeter when you
are selecting front speakers. (DNX/DDX7
models only)
If you are using a tweeter together with the
front speakers, set the tweeter to "ON". In the
"ON" position, the Equalizer is adjusted to its
best position.
[X'over] Displays the Speaker Crossover Setup
screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
72 DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
> >
] [Audio SETUP]
3 Select a speaker type
You can select any of the following speaker
types.
DNX/ DDX7 models
"Front" OEM, 10 cm, 13 cm, 16 cm, 17 cm, 18
cm, 4x6, 5x7, 6x8, 6x9, 7x10
"Rear" NONE, OEM, 10 cm, 13 cm, 16 cm, 17
cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
"Subwoofer" NONE, 16 cm, 20 cm, 25 cm, 30
cm, 38 cm over
DDX6 models
Standard, Narrow, Middle, Wide
⁄
• Select "NONE" if you have no speakers.
Crossover Network Setup
You can set a crossover frequency of speakers.
1 Select the speaker to set the crossover
1 1 1
2 2 2
3 3 3
1 Sets the High Pass Filter of the front speaker.
2 Sets the High Pass Filter of the rear speaker.
3 Sets the Low Pass Filter of the sub woofer.
2 Display the Crossover setup screen
3 Set the crossover