Table of Contents
Advertisement
English
Attenuator
This function amplifies low and high tones when the volume
is turned down.
The LOUD indicator lights up when the loudness function is
on.
aor.
Turning Loudness On/Off:
Press the LOUD button for at least one second to switch the
loudness on and off.
a
Function
Set System
To accommodate a greater number of functions, a function set
system has been employed for making settings.
Press the
FNC button to enter the function set mode and then display
the function to make the setting. Details on each setting are
explained separately in the corresponding function page.
1 Press the FNC button for at least one second.
"Function Set" is displayed when the function set mode is
entered.
The function that you can adjust is indicated with the current
settings displayed.
Selecting function to set
Press the Ke button to search through the functions
backward.
Press either the AM or FM button.
The setting will change for each function.
Example: The side bar display setting will switch from "SIDE
BAR A" to "SIDE BAR B". Pressing the button again
switches the setting to C, and "SIDE BAR C' is
displayed.
With the auto memory function, the function will start to
activate.
To use the auto memory function, press either the AM or FM
button for at least two seconds.
Advertisement
Table of Contents
