Energy Saving - Clarity BT914 User Manual

To activate the energy-saving charging mode:
1. Unplug the telephone base power adapter from the power
outlet. Make sure all handsets are plugged with charged
batteries before proceeding.
2. While you press and hold FIND, plug the telephone base
power adapter back to the power outlet.
3. After about 20 seconds, release the FIND button and then
press it again within 2 seconds.
When the phone successfully enters the energy-saving mode,
the handsets display To register HS... and ...see manual alter-
nately.
When the phone fails to enter this mode, repeat Step 1
through 3 above. The telephone base will be powered up as
normal if you fail to press FIND within 2 seconds in Step 3.
To deactivate the energy-saving charging mode:
1. Unplug the telephone base power adapter from the power
outlet, and then plug it back in. Then the telephone base is
powered up as normal.
2. Register your handsets back to the telephone base.
Note:
Remember that electrical appliances can cause serious injury if
used when you are wet or standing in water. If the telephone
base should fall into water, DO NOT RETRIEVE IT

ENERGY SAVING

61