Temporary Ringer Silencing; Temporary Tone Dialing; Call Waiting On The Cell Line - Clarity BT914 User Manual

TELEPHONE OPERATIONS
• Press FLASH to switch back and forth between calls.

Call waiting on the cell line:

• Press the Cell phone button to put the current call on
hold and take the new call.
• Press the Cell phone button to switch back and forth
between calls.

Temporary ringer silencing

When the telephone is ringing, you can temporarily silence the
ringer of the handset without disconnecting the call. The next
call rings normally at the present volume. The base will still
ring unless you have turned the base ringer off.
• Press the Red Phone button or MUTE on the handset.
The handset displays a bell with a line through it.
Note: The base will still ring even if you temporarily silence
the handset. The base will not ring if you turned the base
ringer off.

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from
pulse to dialing temporarily during a call.
1. During a call, press *.
2. Use the dialing keys to enter the relevant number. The
telephone sends touch-tone signals. It automatically returns
to pulse dialing mode after you end the call.
37