Residual Risks - DeWalt XR LI-ION DCT416 Instruction Manual

• Do not use imaging thermometer for
testing temperatures of cooked or
uncooked food.
• Do not touch surfaces to confirm hot
temperature readings.
• Do not use for taking human or animal
body temperatures.
• To avoid damaging the imaging thermometer
or the equipment under test, protect them from
the following:
– EMF (electromagnetic fields) like from arc
welders, induction heaters, etc.
– ESD (electrostatic discharge).
– Thermal shock (caused by abrupt
ambient temperature changes for highest
accuracy; allow 30 minutes for the imaging
thermometer to stabilize before use).
WARNING: Burn hazard. The reading
may not be accurate if the imaging
thermometer is in the presence of
strong electromagnetic fields (such
as arc welders, induction heaters,
ratio transmitters, etc.). Do not use
the imaging thermometer under these
conditions.
WARNING: The imaging thermometer
measures surface temperature only.
Objects behind the surface may have
significantly different temperatures,
posing a burn or frostbite hazard.
WARNING: See emissivity information
for actual temperatures. Reflective
objects result in lower than actual
temperature measurements and can
pose a burn hazard.
WARNING: Do not expose imaging
thermometer to excessive heat such as
sunshine, fire or the like.
CAUTION: When not in use, place
imaging thermometer on its side
on a stable surface where it will not
cause a tripping or falling hazard.
Some tools with large battery packs will
stand upright on the battery pack but
may be easily knocked over.
NOTICE: Modifications not authorised
by the manufacturer may void user's
authority to operate this device.
NOTICE: To avoid damage to the
imaging thermometer, do not leave
it exposed to high temperature
environments or heat sources, for
example, in a vehicle in the sun. Always
operate the imaging thermometer
within the operating range noted in the
specification chart.
NOTICE: Do not point the imaging
thermometer (with or without the lens
cover engaged) at the sun or other
intensive energy sources that emit laser
radiation. This can damage the detector
inside the imaging thermometer and can
effect the accuracy.
MICRO SD MEMORY CARD
WARNING: Choking hazard. The micro
SD memory card is a small part that
could lead to a choking hazard and is
not intended for children.
NOTICE: It is recommended to use the
micro SD memory card supplied with
the imaging thermometer. D
not warrant the use or reliability of other
aftermarket cards with different brands
or capacities. It is also recommended to
frequently transfer the saved images to
a computer as a backup.

Residual Risks

In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Risk of personal injury due to prolonged use.
– Risk of personal injury due to unintentional
contact with current-carrying parts during the
work process.
Markings on Imaging Thermometer
The following pictograms are shown on the imaging
thermometer:
Read instruction manual before use.
DATE CODE POSITION
The date code, which also includes the year of
manufacture, is printed into the housing surface that
forms the mounting joint between tool and battery.
Example:
2012 XX XX
Year of Manufacture
EN GL IS H
WALT does
E
35