Storage Recommendations; Package Contents - DeWalt XR LI-ION DCT416 Instruction Manual

EN GLI SH

Storage Recommendations

1. The best storage place is one that is cool and
dry, away from direct sunlight and excess heat
or cold. For optimum battery performance and
life, store battery packs at room temperature
when not in use.
2. For long storage, it is recommended to store a
fully charged battery pack in a cool, dry place
out of the charger for optimal results.
NOTE: Battery packs should not be stored
completely depleted of charge. The battery pack will
need to be recharged before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
Read instruction manual
before use.
Battery charging.
100%
Battery charged.
100%
Battery defective.
Hot/cold pack delay.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Use only with D WALT battery packs,
E
others may burst, causing personal injury
and damage.
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4 ˚C and 40 ˚C.
Discard the battery pack with due care for
the environment.
38
Do not incinerate the battery pack.
See Technical data for charging time.
Only for indoor use.

Package Contents

The package contains:
1 Imaging thermometer
1 Micro SD memory card
1 10.8 V XR lithium-ion battery pack
1 Charger
1 Instruction manual
1 Exploded drawing
NOTE: Battery packs and chargers are not included
with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 2)
WARNING: Never modify the imaging
thermometer or any part of it. Damage
or personal injury could result.
a. 10.8 V XR lithium-ion battery pack
b. Handle
c. Screen
d. Micro SD card slot cover
e. Mirco SD card slot
f. Lens
g. Lens cover
h. Back Arrow Button: Press this
button to navigate backward.
i. Select Button: Press this button to
confirm a selection.
j. Forward Arrow Button: Press this
button to navigate forward.
k. Image Blend Adjust Button: Press
this button to change the percentage
blend between the visual and thermal
images.