DeWalt XR LI-ION DCT416 Instruction Manual page 13

Background Temperature
For more accurate temperature measurements, it is
recommended to set the background (or reflected
temperature). This is especially important when the
object being measured is at a significantly different
temperature than ambient or if the object being
measured has a low emissivity.
Setting the background temperature will help
compensate for the radiation from the surroundings.
To Change Background Temperature
1. Press the menu/power button (l).
2. Press the forward (j) or back (h) arrow to
highlight the background temperature option in
the menu.
3. Press the select button (i) to confirm selection.
4. Press the forward (j) or back (h) arrow to adjust
the background temperature. The background
temperature can be adjusted in 1 degree
increments.
5. Press the select button (i) to confirm the
background temperature setting.
6. After saving the background temperature
setting, the imaging thermometer will
automatically return to the main menu screen.
To Change Color Palette
1. Press the menu/power button (l).
2. Press the forward (j) or back (h) arrow to
highlight the color palette option in the menu.
3. Press the select button (i) to confirm selection.
4. Press the forward (j) or back (h) arrow to scroll
through the color palette options. The five
palette choices include: Ironbow, White Hot,
Black Hot, Rainbow, and High Contrast.
5. Press the select button (i) to confirm the color
palette setting.
6. After saving the color palette setting, the
imaging thermometer will automatically return to
the main menu screen.
To Change the Tracking Setting
When the tracking feature is on, the imaging
thermometer will locate the hottest (red o) and
coldest (blue o) spot in the displayed area. The
imaging thermometer can moved to align the center
measurement spot (+) to the desired location.
NOTE: The displayed temperature always
corresponds to the center (+).
1. Press the menu/power button (l).
2. Press the forward (j) or back (h) arrow to
highlight the tracking option in the menu.
3. Press the select button (i) to confirm selection.
4. Press the forward (j) or back (h) arrow to turn on
or off the tracking feature.
5. Press the select button (i) to confirm the
tracking feature setting.
6. After saving the tracking feature setting, the
imaging thermometer will automatically return to
the main menu screen.
To Set Date and Time
1. Press the menu/power button (l).
2. Press the forward (j) or back (h) arrow to
highlight the date and time option in the menu.
EN GL IS H
43