Residual Risks - DeWalt D25501 Manual

Residual Risks

The following risks are inherent to the use of rotary and
chipping hammers:
– Injuries caused by touching the rotating parts or
hot parts of the tool
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks cannot be avoided. These are:
– Impairment of hearing.
– Risk of squeezing fingers when changing the
accessory.
– Health hazards caused by breathing dust developed
when working in concrete and/or masonry.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Red service indicator LED. For detailed
description see under Service Indicator LED's.
Yellow service indicator LED. For detailed
description see under Service Indicator LED's.
DATE CODE POSITION (FIG. 1)
The Date Code (w), which also includes the year of
manufacture, is printed into the housing.
Example:
2010 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Rotary hammer
1 Side handle
1 Kitbox (K-models only)
1 Instruction manual
Check for damage to the tool, parts or accessories
•
which may have occurred during transport.
Take the time to thoroughly read and understand this
•
manual prior to operation.
Description (fig. 1a, 1b, 2a–c)
WARNING: Never modify the power tool
or any part of it. Damage or personal injury
could result.
a. Trigger switch
c. Side handle
d. Main handle
e. Active vibration control (D25601)
f. Mode selector switch
g. Electronic speed and impact control dial (D25601)
h. Clamp wheel
i. Rear side handle position
j. Side handle clamp
k. Steel ring
l. Bush
m. Tool holder
n. Depth rod release button
o. Depth rod
p. Locking sleeve
q. Pin
x. Collar
INTENDED USE
D25501,D25601
Your rotary hammer has been designed for professional
rotary drilling and chipping applications.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These hammers are professional power tools.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Soft Start Feature
D25601
The soft start feature allows the speed to build up speed
slowly, thus preventing the drill bit from walking off the
intended hole position when starting. The soft start feature
also reduces the immediate torque reaction transmitted to
the gearing and the operator if the hammer is started with
the drill bit in an existing hole.
ENGLISH
5