Font Type Select
Selecting the display font.
1
Select Font Type Select Mode
Press the [FM] or [AM] button.
Select the "Font Select" display.
2
Select the font
Press the [4] or [¢] button.
Dimmer
Dimming this unit's display automatically when the vehicle light
switch is turned ON.
Display
"Dimmer:ON"/"Dimmer ON"
"Dimmer:OFF"/"Dimmer OFF"
OFF Wait Time Setting
Setting the time until the faceplate hide operation starts after the
power is turned OFF.
The faceplate can be removed only during the set time period.
Display and Setting
"Off Wait: 0sec"/"Off Wait 0sec"
"Off Wait: 3sec"/"Off Wait 3sec" (Original setting)
"Off Wait:25sec"/"Off Wait 25sec"
Function of the KDC-X969
Setting
The display dims.
The display doesn't dim.
— 43 —
Eject angle setting
This function sets the opening and closing operation of a panel
when a disc is inserted and when it is ejected.
Display
Setting
"Ejct Angle:Slope"/
"Ejct Angle Slope"
"Ejct Angle:Level"/
"Ejct Angle Level"
System Q Setting
Setting display/don't display for the System Q factors (Bass
center frequency, Bass Q factor, Bass extend, Middle center
frequency, Middle Q factor, and Treble center frequency) in
Audio control.
Display
Setting
"System Q:ON"/
"System Q ON"
"System Q:OFF"/
"System Q OFF"
<In Standby mode>
Opens and closes the panel while
maintaining the angle of the
control panel to the set angle.
Opens and closes the panel after
setting the angle of the control
panel to the horizontal position.
Function of the KDC-X969/KDC-X869
The System Q factors are
displayed.
The System Q factors aren't
displayed.