Kenwood KDC-X869 Instruction Manual page 14

General features
1st section
[2] button
Adjustment Item Display
Bass Center** "Bass FRQ"
Frequency
Bass level "Bass"
Bass Q Factor** "Bass Q"
Bass Extend** "Bass EXT"
[3] button
Adjustment Item Display
Middle Center** "MID FRQ"/"Middle FRQ" 0.5/1.0/1.5/2.0 kHz
Frequency
Middle level "MID"/"Middle"
Middle Q Factor** "MID Q"/"Middle Q"
[4] button
Adjustment Item Display
Treble Center** "TRE FRQ"/"Treble FRQ"
Frequency
Treble level "TRE"/"Treble"
[5] button
Adjustment Item Display
Balance "Balance"
Fader "Fader"
Range
60/70/80/100 or 150 Hz
–8 — +8
1.00/1.25/1.50/2.00
ON/OFF
Range
–8 — +8
1.0/2.0
Range
10.0/12.5/15.0/
17.5 kHz
–8 — +8
Range
Left 15 — Right 15
Rear 15 — Front 15
— 14 —
• According to the Bass Q Factor setting value, the frequencies that
can be set in Bass Center Frequency change as shown below.
Bass Q Factor
1.00/1.25/1.50
2.00
• When the bass extend is set to ON, low frequency response is
extended by 20%.
**
• KDC-X969/ KDC-X869 only
2nd section
[2] button
Adjustment Item Display
Front High Pass Filter "HPF Front"
Rear High Pass Filter "HPF Rear"
[3] button
Adjustment Item Display
Non-Fading "LPF NF"
Low Pass Filter
[4] button
Adjustment Item Display
Loudness "Loudness"
Bass Center Frequency
60/70/80/100
60/70/80/150
Range
Through/40/60/80/100/
120/150/180/220 Hz
Through/40/60/80/100/
120/150/180/220 Hz
Range
50/80/120/Through Hz
Range
ON/OFF