Station/Disc Naming (Snps/Dnps); Auxiliary Input Display Setting - Kenwood KDC-X869 Instruction Manual

General features

Station/Disc Naming (SNPS/DNPS)

Attaching a title to a Station or CD.
1
Receive/play the station/disc you want to attach a title to
A title can't be attached to MD.
2
Enter name set mode
Press the [NAME.S] button for at least 2 seconds.
"Name Set" is displayed.
3
Move the cursor to the enter character position
Press the [4] or [¢] button.
4
Select the character type
Press the [2] — [4] button.
Each time the button is pressed the character type switches as
shown below.
Character type
Alphabet (Upper case/ Lower case)
Numbers and symbols
Special characters (Accent characters)
5
Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character Button
"D" [3]
"A" [2]
"N" [6]
"C" [2]
"E" [3]
Button
[2] ("A • a")
[3] ("1")
[4] ("CHAR")
Times pressed
1
1
2
3
2
— 24 —
6
Repeat steps 3 through 5 and enter the name.
7
Exit name set mode
Press the [NAME.S] button.
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Memory numbers
- FM: 32 stations
- AM: 16 stations
- Internal CD player: 30 discs
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The title of station/CD can be changed by the same operation
used to name it.

Auxiliary Input Display Setting

Selecting the display when this device is switched to Auxiliary
input source.
1
Select Auxiliary input source
Press the [SRC] button.
Select the "AUX"/"AUX1" display.
2
Enter Auxiliary input display setting mode
Press the [NAME.S] button for at least 2 seconds.
The presently selected AUX Name is blinks.
3
Select the Auxiliary input display
Press the [4] or [¢] button.
Each time the button is pressed it switches through the below
displays.