Kenwood KDC-X869 Instruction Manual page 29

4
Put the frequency in the memory
Press the desired [1] — [6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory on each [1] —
[6] button.
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
1
Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2
Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in the memory
Auto Memory Entry closes.
Preset Tuning
Calling up the stations in the memory.
1
Select the band
Press the [FM] or [AM] button.
2
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "[1]" — "[6]" are displayed above
the [1] — [6] buttons.
Refer to <Notes on Multi-function Key System> (page 8).
3
Call up the station
Press the desired [1] — [6] button.
SNPP (Station Name Preset Play)
Selecting the stations to display SNPS.
1
Enter SNPP mode
Press the [DNPP] button on the remote.
When "SNPP" is displayed, SNPS displays the FM1, FM2, FM3
and AM bands in order.
If the station has no name, the frequency or program service name
is displayed instead.
Changing the display order
Press the [4] or [¢] button.
Changing the displayed band
Press the [FM] or [AM] button.
2
If the station you want is displayed
Press the [OK] button on the remote.
The displayed SNPS station is received.
Canceling the SNPP mode
Press the [DNPP] button on the remote.
— 29 —
(Function of Remote)