Making A Call; Dial A Number; Speed Dialing (Preset Dial); Calling A Number In The Phone Book - Kenwood KDC-BT8041U Instruction Manual

Making a call

1
Enter dialing method mode
Press the [ATT] button for at least 1 second.
2
Select a dialing method
Press the Control knob.
"DIAL" » "INITIAL" » "P-BOOK" » "OUT-CALL" » "IN-
CALL" » "MIS-CALL"
Methods of operations in the above modes are
described below.
3
Exit the dialing method mode
Press the [ATT] button for at least 1 second.

Dial a number

1
Enter dialing method mode
Press the [ATT] button for at least 1 second.
2
Select the number dial mode
Press the Control knob.
Select the "DIAL" display.
3
Enter a phone number
Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
4
Make a call
Press the [DIRECT] button on the remote
controller.
To erase the entered phone number digit by
digit:
Press the [4] button on the remote controller.
⁄
• You can input max 32 digits.

Speed dialing (Preset dial)

1
Enter dialing method mode
Press the [ATT] button for at least 1 second.
2
Press the Control knob.
Select the "DIAL", "P-BOOK", "OUT-CALL", "IN-CALL", or
"MIS-CALL" display.
3
Enter preset dial mode
Press the [FNC] button.
4
Select the number you want to recall from the
memory
Turn the Control knob or push it towards left
or right.
5
Press the Control knob.
6
Press the [FNC] button.
7
Make a call
Press the Control knob for at least 1 second.
⁄
• You need to register the preset dial number. (page 18)

Calling a number in the Phone Book

1
Enter dialing method mode
Press the [ATT] button for at least 1 second.
2
Select the Phone Book mode
Press the Control knob.
Select the "INITIAL" display, proceed to step 3.
Select the "P-BOOK" display, proceed to step 4.
3
Select the initial to be searched for
Operation type
Move to the next character.
Move to the next row.
Determine the selected initial. Press the Control knob for at least 1
4
Select the name
Operation type
Move to the next phone
number.
Move to the next name.
5
Make a call
Press the Control knob for at least 1 second.
⁄
• During search, a non-accent character such as "u" is
searched for instead of an accent character such as "ü".
The non-alphabetical caracters such as Chinese and
Russian are classified as symbol.
Operation
Push the Control knob towards right
or left.
Push the Control knob towards up or
down.
second.
Operation
Turn the Control knob or push it
towards up or down.
Push the Control knob towards right
or left.
English
17
|