Clearing The Disconnection Message; Making A Voice Dialing Call; Displays Of Phone Number Type (Category) - Kenwood KDC-X494 Quick Start Manual

Function of KCA-BT200 (Optional Accessory)
Operation of hands-free phoning

Clearing the Disconnection Message

Press the [FNC] button for at least 1 second.
"HF Disconnect" disappears.

Making a voice dialing call

1
Enter Bluetooth mode
Press the [FNC] button for at least 1 second.
"BT MODE" is displayed.
2
Enter voice recognize mode
Press the [AUDIO] button for at least 1 second.
3
Have the unit recognize your spoken name
Press the [ENTER] button. If you hear a beep,
speak a registered name within 2 seconds.
4
Have the unit recognize the spoken category
When you hear a beep, speak the category
within 2 seconds.
The recognized phone number (name) is displayed.
When you want to change the displayed phone
number (name), press the [S.MODE] button.
5
Make a call
Press the [ENTER] button.
⁄
• If your voice cannot be recognized, a message is displayed.
Refer to <Troubleshooting Guide> (page
Pressing the [ENTER] button allows you to retry voice input.
• Both the name and category requires registration of a voice
tag. Refer to <Setting a Voice Command for Category>
(page 36).
30
|
KDC-X494/ KDC-MP445U/ KMR-440U
Displays of phone number type
(category)
The category items in the Phone Book are displayed
as follows:
Display
"General" / "
"Home" / "
"Office" / "
"Mobile" / "
"Other" / "
41).
Information
" General
" Home
" Office
" Mobile
" Other