Auto Memory Entry Preset Tuning Direct Access Tuning PTY (Program Type) Program Type Preset Changing Language for PTY Function KDC-BT60U/ KDC-6047U Bluetooth Audio Operation Connecting a Bluetooth Device Basic Operation Operation of hands-free phoning Connecting a Bluetooth Device Receiving a Call...
Page 3
Basic Operations of remote control Appendix About Audio file iPod/iPhone that can be connected to this unit About USB device About “KENWOOD Music Editor” About the Cell-Phone About the Bluetooth Audio player Menu List Display Indicator items Accessories/ Installation Procedure...
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • Characters that conform to ISO 8859-1 can be displayed.
Handling CDs • Do not touch the recording surface of the CD. • Do not stick tape etc. on the CD, or use a CD with tape stuck on it. • Do not use disc type accessories. • Clean from the center of the disc and move outward.
KDC-BT60U : To turn on or off the traffic information function (press the button at least 1 second). KDC-6047U : To make a voice dialing call (press the button at least 1 second). 5 [SEARCH MODE] button To enter Search mode (iPod), move between folders (Audio file), etc.
General operation Before Using Exit of the Demonstration Mode Turn off the demonstration mode when you use it for the first time after installation. Press the [VOL] knob to quit the demonstration mode when the messages “To Cancel Demo Press the Volume Knob” are displayed (approx. 15 seconds).
Songs “Podcasts” Podcasts “Genres” Genres “Composers” Composers Select iPod source KDC-BT60U/ KDC-6047U SEARCH MODE Enter Menu List mode Press the [MENU] button. Turn the [VOL] knob and press it when the desired item is displayed. Select “Music”. Select a song...
Play Mode You can select a Play Mode, such as Random play and Repeat play. Select iPod source Enter Menu List mode Press the [MENU] button. Turn the [VOL] knob and press it when the desired item is displayed. Select “Play Mode”. Select the Play Mode Turn the [VOL] knob.
Turn the [VOL] knob. Start the search mode Press the [VOL] knob. Cancelling Search mode Press the [SEARCH MODE ] button. KDC-BT60U/ KDC-6047U Direct Search You can quickly search the desired song by specifying its Search item (artist, album, etc.) and initial.
Related Search Searches for music of the same artist or genre as the one being played. Play the music in iPod Press the [SEARCH MODE] button. Enter Related Search mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Related Search”.
Press the [SEARCH MODE] button. ⁄ • Set the ratio with “Skip Search” in <iPod Setting> (page KDC-BT60U/ KDC-6047U My Playlist Allows you to register your favorite songs in the Playlist of this unit. You can register up to 10 songs in the Playlist.
Enter Delete Playlist mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Delete My Playlist”. Turn the [VOL] knob and press it when the desired item is displayed. Select ”Delete One” or ”Delete All”. Selecting “Delete All”...
Press the [38] button for at least 2 seconds. The unit enters the USB REMOVE mode (“USB REMOVE” is displayed), and the USB device can be removed safely. KDC-BT60U/ KDC-6047U SEARCH MODE File Search Selecting the file you want to listen to from the device being played now.
¡" ¡! ¡# Cancelling Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. ⁄ • When you search a song in the File Search mode, the unit memorizes the position of the song being played after the search.
Cancelling the Skip Search Press the [SEARCH MODE] button. ⁄ • This operation is effective only for the files registered in the database created with KENWOOD Music Editor. • Set the ratio with “Skip Search” in <USB Setting> (page KDC-BT60U/ KDC-6047U...
Music CD/ Audio file Operation Release MENU VOL DISP ¢ / TI Basic Operation Drop open the faceplate Press the Release button. ⁄ • Push the faceplate on the left side, and return it to its former position. Disc play •...
When set to “ON”, plays the intro of the music on the disc successively. “ON”/ “OFF” “Disc Random” When set to “ON”, plays the music on the disc randomly. “ON”/ “OFF” KDC-BT60U/ KDC-6047U “Magazine Random” “Track Repeat” “Disc Repeat” Make a setting Press the [4] or [¢] button.
Function of remote control Direct Music Search Searching the music by entering the track number. Enter Direct Music Search mode Press the [DIRECT] button on the remote control. Enter the music number Press the number buttons on the remote control. Search the music Press the [4] or [¢] button.
Tuner Setting You can select following Tuner Setting items. Select Tuner source Enter Menu List mode Press the [MENU] button. KDC-BT60U/ KDC-6047U Turn the [VOL] knob and press it when the SEARCH MODE desired item is displayed. Select “Settings”. Select the setting item to adjust Turn the [VOL] knob and press it when the desired item is displayed.
news bulletin volume is the same level that was set for Traffic Information. • Forced MONO Strong electrical fields (such as from power lines) may cause unstable sound quality when it is set to ON. In such a situation, turn it OFF. Station Preset Memory Putting a station in the memory.
• When the selected Program Type is not found, “No PTY” is displayed. Select another Program Type. • The operation ends automatically if you do not operate within 30 seconds. KDC-BT60U/ KDC-6047U Program Type Preset Putting the Program Type in the Preset button memory and quick recall.
Start registering this unit by operating the Bluetooth device By operating the Bluetooth device, register the audio player (pairing). Select “KENWOOD BT CD/R- 4P1”/ “KCA-BT200” from the list of connected units. Enter a PIN code Input the PIN code (“0000”) in the Bluetooth device.
Function of KDC-BT60U KDC-6047U with KCA-BT200 (Optional Accessory) Operation of hands-free phoning MENU VOL ¢ / TI Connecting a Bluetooth Device Before use the Bluetooth device, you need to connect Bluetooth device to this unit. The following 3 steps procedure is necessary.
Each pressing of this knob switches the calling party. Other Functions Clearing the Disconnection Message KDC-BT60U Press the [ ] button. KDC-6047U Press the [TI] button for at least 1 second. “HF Disconnect” disappears. Making a Call Enter Bluetooth mode KDC-BT60U Press the [ ] button.
Function of KDC-BT60U KDC-6047U with KCA-BT200 (Optional Accessory) Operation of hands-free phoning Calling a Number in the Phone Book Enter Bluetooth mode KDC-BT60U Press the [ ] button. KDC-6047U Press the [TI] button for at least 1 second. Select the Phone Book mode Turn the [VOL] knob and press it when the desired item is displayed.
Function of KDC-6047U Make a Voice Dialing Call Enter voice recognition mode Press the [VOL] button for at least 1 second. “PB Name?” is displayed. When a beep is heard, say the name within 2 seconds. “PN Type” is displayed.
Select” > “Side Select” Text scroll Press the [DISP] button for at least 1 second. The displayed text scrolls. KDC-BT60U/ KDC-6047U Display Setting You can select following Display Setting items. Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed.
Page 29
“ILLUMI Effect” Sets whether the key illumination brightness is changed in conjunction with the key operation. “OFF”/ “ON” “ILLUMI MSC Sets whether the key illumination color is SYNC” changed in conjunction with the sound volume. “OFF”/ “ON” Make a setting •...
Page 30
Press the [4] or [¢] button. Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. KDC-BT60U/ KDC-6047U Text Display Selection In FM Tuner source Frequency & Program Service name (“Frequency/PS”) Song title* (“Song Title”)
In Auxiliary input source Source name (“Source Name”) Date (“Date”) Spectrum analyzer & Clock Blank (“Blank”) (“Speana/Clock”) In Standby Source name (“Source Name”) Clock (“Clock”) Date (“Date”) Blank (“Blank”) In Bluetooth audio source (KDC-BT60U only) 5-line display mode Bluetooth audio (“Source Name”) Spectrum analyzer &...
Exit the detail color adjustment mode. Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. KDC-BT60U/ KDC-6047U Auxiliary Input Display Setting Selecting the display when changing to Auxiliary input source.
Clock and Other Functions Release MENU VOL ¢ Clock and Date Adjustment You can adjust the clock and date. Display Overview “Settings” “Clock & Date” “Clock Adjust” Sets the clock. “Time Synchronize” Synchronizing the RDS station time data and this unit’s clock. “OFF”/ “ON”...
“OFF”: Disable AUX source selection. Use this setting when the built-in AUX terminal is not used. “Forced CD-DA” Sets the CD read mode. “1”/ “2” KDC-BT60U/ KDC-6047U “Favorite Delete” Deletes Favorite Preset Memory. Refer to <Favorite Preset Memory Delete> (page 44).
Turn the [VOL] knob and press it when the desired item is displayed. Select “ON” or “OFF”. Exit Menu List mode Press the [MENU] button. Function of KDC-6047U Muting volume upon reception of Phone call The audio system automatically mutes when a call comes in.
- X’Over Setting (page “Volume offset” Sets each source’s volume as a difference from the basic volume. “–8” — “±0” (AUX: “-8”— “+8”) KDC-BT60U/ KDC-6047U “2Zone” “Preset” Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed.
Preset Equalizer curve Select You can select following Equalizer curve. Display Equalizer curve “Natural” Natural “User” User* “Rock” Rock “Pops” Pops “Easy” Easy “Top 40” Top 40 “Jazz” Jazz “Game” Game “iPod” iPod (During iPod source only) * The Equalizer curve set in the section <Manual Equalizer Control>...
Press the [4] or [¢] button. Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. KDC-BT60U/ KDC-6047U Listening Position Fine Adjustments Making fine adjustment of the value specified at Preset position selection per speaker.
Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. Display Overview “2Zone Rear Volume”* Adjust the volume of Rear channel. “0” — “35” “Detailed Setup” “2Zone” Sets the Dual Zone System. “OFF”/ “ON” “2Zone Select”* Specifies the destination of sub source sound when the Dual Zone function is turned on.
⁄ • You can compensate the distances in more details by using <Car Type Fine Adjustments> (page 41) KDC-BT60U/ KDC-6047U Speaker Setting The speaker X’Over is automatically set when the position and size of each speaker are selected from the following items.
Car Type Fine Adjustments Adjusting fine tuning of the speaker position compensation value specified at Selection> (page 40). Display Item “Front” Front speaker “Rear” Rear speaker “SW” Subwoofer Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed.
Set the value Press the [VOL] button. Repeat steps 3 to 4 to complete the X’Over settings. Exit Audio Control mode KDC-BT60U/ KDC-6047U Press the [MENU] button for at least 1 second, and then press it again briefly. Audio Preset Memory 40).
Audio Preset Recall Recalling the sound setup registered by Preset Memory> (page 42). Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than “STANDBY”. ✍ SRC Select mode 2: Pressing the [SRC] button repeatedly switches source.
• Register 6 of Favorite Preset Memory. The memory cannot be erased by the Reset button. KDC-BT60U/ KDC-6047U • If the contents in iPod are changed after the FAVORITE registration, the list registered in this unit becomes different from that in iPod.
Function of KDC-BT60U KDC-6047U with KCA-BT200 (Optional Accessory) Bluetooth Setup MENU VOL ¢ / TI Bluetooth Setting You can select following Bluetooth Setting items. Enter Bluetooth mode KDC-BT60U Press the [ ] button. KDC-6047U Press the [TI] button for at least 1 second.
Registering from this unit Enter Bluetooth mode KDC-BT60U Press the [ ] button. KDC-6047U Press the [TI] button for at least 1 second. ✍ You can also select from “Settings” in Menu List mode. Enter Bluetooth device registration mode Turn the [VOL] knob and press it when the desired item is displayed.
Function of KDC-BT60U KDC-6047U with KCA-BT200 (Optional Accessory) Bluetooth Setup Registering PIN Code By operating the Bluetooth device, specify the PIN code necessary for registering this unit. Enter Bluetooth mode KDC-BT60U Press the [ ] button. KDC-6047U Press the [TI] button for at least 1 second.
You can delete a registered Bluetooth device. Enter Bluetooth mode KDC-BT60U Press the [ ] button. KDC-6047U Press the [TI] button for at least 1 second. ✍ You can also select from “Settings” in Menu List mode. Enter Bluetooth device deletion mode Turn the [VOL] knob and press it when the desired item is displayed.
Function of KDC-BT60U KDC-6047U with KCA-BT200 (Optional Accessory) Bluetooth Setup Function of KDC-6047U Adding a Voice Dialing Command Add a voice tag to the phone book for voice dialing. You can register up to 35 voice tags. Enter Bluetooth mode Press the [TI] button for at least 1 second.
Page 51
⁄ • Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phone book may not be recalled by voice command. English...
Function of KDC-BT60U KDC-6047U with KCA-BT200 (Optional Accessory) SMS (Short Message Service) Downloading the SMS Download the short message (SMS) arrived at the cell-phone so that it can be read on this unit. Enter Bluetooth mode KDC-BT60U Press the [ ] button.
Page 53
• The short message cannot be displayed during downloading the SMS. English...
In this case, “RESUMING” is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc. • You cannot operate iPod if “KENWOOD” or “✓” displayed on iPod. About USB device • When the USB device is connected to this unit, it can be charged up provided that this unit is powered.
KENWOOD Music Editor. • “KENWOOD Music Editor Lite ver1.0” is available from the following web site: www.kenwood.com/cs/ce/ • For further information on “KENWOOD Music Editor Lite ver1.0”, refer to the site above or the application...
Indicates that battery level of cell-phone. Full Indicates that the battery level of cell-phone cannot be obtained. Indicates that signal strength of cell-phone. Maximum Indicates the out of coverage zone. Indicates that the signal strength of cell-phone cannot be obtained. KDC-BT60U/ KDC-6047U Nearly dead Minimum...
Page 61
• The “AAC” logo is trademark of Dolby Laboratories. • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners.
(i.e., it will not turn on and off KDC-BT60U/ KDC-6047U along with the ignition). If you want to link the unit’s power with the ignition, connect the ignition wire to a power source that can be turned on and off with the ignition key.
To Kenwood disc changer/External optional accessory To connect these leads, refer to the relevant instruction ⁄ manuals. To use the steering wheel remote control feature, you...
Page 64
A-4 pin (yellow) is linked to the ignition. Ignition cable A-7 Pin (Red) (Red) Unit Battery cable A-4 Pin (Yellow) (Yellow) KDC-BT60U/ KDC-6047U Functions Battery Power Control Dimmer Ignition (ACC) Earth (Ground) Connection Rear Right (+) Rear Right (–)
Installation/Removing the Unit Installation Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
Page 66
Peel the release coated paper of double-face adhesive tape to fix on the place shown above. Adjust the direction of the microphone to the driver. ⁄ • Install the microphone as far as possible from the cell- phone. KDC-BT60U/ KDC-6047U...
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. • Cannot set up the subwoofer. • No output from the subwoofer. • Cannot set up the subwoofer position of Manual position setting. •...
Page 68
Another Bluetooth device or profile is used for communication. The downloading of the Phone book or the SMS disconnects the sound. KDC-BT60U/ KDC-6047U The messages shown below display your systems condition. TOC Error: • No disc has been loaded in the disc magazine.
Page 69
N/A Device: • An unsupported USB device is connected. • Connection to the iPod has failed. Check that the connected iPod is an iPod that is supported. See (page 56) for information on supported iPods. No Music Data/Error 15: •...
: 10 kΩ General Operating voltage KDC-BT60U (10.5 – 16V allowable) : 14.4 V KDC-6047U (11 – 16V allowable) : 14.4 V Maximum Current consumption : 10 A Installation Size (W x H x D) : 182 x 53 x 158 mm Weight : 1.30 kg...
Page 72
1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Slovensko S tem Kenwood izjavlja, da je ta KDC-BT60U v skladu z osnovnimi zahtevami in ostalimi ustreznimi predpisi Direktive 1999/5/EC. Slovensky Spoločnosť Kenwood týmto vyhlasuje, že KDC-BT60U spĺňa zákldné požiadavky a ďalšie prislušné...