Connecting Cables To Terminals - Kenwood KDC-8080R Instruction Manual

Connecting Cables to Terminals

Connector Function Guide
Pin Numbers for
Cable Colour
ISO Connectors
External Power
Connector
A–4 Yellow
A–5 Blue/White
A–6 Orange/White
A–7 Red
A–8 Black
Speaker
Connector
B–1 Purple
B–2 Purple/Black
B–3 Gray
B–4 Gray/Black
B–5 White
B–6 White/Black
B–7 Green
B–8 Green/Black
Antenna Conversion Adaptor (ISO–JASO) (Accessory3)
FM/AM
antenna input
Functions
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
Fuse(10A)
+
Rear Right ( )
Wiring harness
–
Rear Right ( )
(Accessory1)
+
Front Right ( )
–
Front Right ( )
+
Front Left ( )
–
Front Left ( )
+
Rear Left ( )
–
Rear Left ( )
Battery cable (Yellow)
Ignition cable (Red)
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Antenna Cord (ISO)
KENWOOD disc changer / DAB control input /
Display Data Output Jack
Outputs data representing the unit's current state, causing it
to appear in the external display.
To connect to this jack, a converting adapter (optional) is
necessary.
NOTE
To connect the Disc changer or DAB unit, consult each
manual.
DC/DC converter box (Wrap the cushion (Accessory0)
around this box.)
2CAUTION
Separate this box from the unit and antenna cords. If they
External amplifier
are too close, it may cause the reception to get noise.
control cable
(Pink / Black)
TEL mute cable (Brown)
TEL MUTE
Power control/ Motor antenna
control cable (Blue/White)
P.CONT.OUT
8 6 4 2
NOTE
7 5 3 1
If no connections are
8 6 4 2
made, do not let the cable
7 5 3 1
come out from the tab.
— 42 —
Non-fading right output (Red) (KDC-PS9080R only)
Non-fading left output (White) (KDC-PS9080R only)
Rear right output (Red) /
Non-fading right output (Red) (KDC-8080R only)
Rear left output (White) /
Non-fading left output (White) (KDC-8080R only)
Front right output (Red)
Front left output (White)
To "EXT.AMP.CONT." terminal of the
EXT.CONT
amplifier having the external amp control
function.
Connect to the terminal that is grounded
when either the telephone rings or during
conversation.
NOTE
To connect the KENWOOD navigation
system, consult your navigation manual.
Connect either to the power control
terminal when using the optional power
amplifier, or to the antenna control terminal
in the vehicle.