Switching Display - Kenwood KDC-8080R Instruction Manual

General features

Switching Display

You can change the display in each mode.
Selecting the Display Mode:
Each time you hold down the D.M button for one second or
more, the display mode switches as follows:
Vertical division display mode
Horizontal division display mode
Full-screen display mode
Changing the Display:
• During full-screen display mode
Each time you press the CLK button, the display switches as
follows:
Character
Spectrum Analyzer1
Spectrum Analyzer2
Spectrum Analyzer3
(Source mode)
NOTE
• This function cannot be operated whilst the Black Mask
function is on.
• Character items are not displayed when the graphic display
function is turned off.
"ALL OFF"
Character
Date + Clock
(Standby mode)
• During horizontal division mode
The left side display is switched each time the CLK button is
pressed.
The right side display is switched each time the DISP button is
pressed.
Example: Tuner mode
Left side display
CLK button
Graphic
Spectrum Analyzer1
Spectrum Analyzer2
Spectrum Analyzer3
Analog clock
Digital clock
NOTE
• This function cannot be operated whilst the Black Mask
function is on.
• The right side display items vary depending on the source
that is playing. For details refer to the "Switching Display"
page for source modes.
— 10 —
Right side display
DISP button
Programme Service name/
Station frequency
Band display
+ Preset station number