Connecting Cables To Terminals - Kenwood KRC-177RA Instruction Manual

Connecting Cables to Terminals

Antenna Conversion Adaptor (ISO–JASO) (Accessory3)
Antenna Cord (ISO)
Connector Function Guide
Pin Numbers for
Cable Colour
ISO Connectors
External Power
Connector
A–4 Yellow
A–5 Blue/White
A–7 Red
A–8 Black
Speaker
Connector
B–1 Purple
B–2 Purple/Black
B–3 Gray
B–4 Gray/Black
B–5 White
B–6 White/Black
B–7 Green
B–8 Green/Black
FM/AM antenna input
Functions
Battery
Power Control
Ignition (ACC)
Earth (Ground)
Rear right output (Red)
Connection
+
Rear Right ( )
–
Rear Right ( )
+
Front Right ( )
–
Front Right ( )
+
Front Left ( )
–
Front Left ( )
+
Rear Left ( )
–
Rear Left ( )
Battery cable (Yellow)
Ignition cable (Red)
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Rear left output (White)
Fuse
Wiring harness
(Accessory1)
If no connections are made, do
not let the cable come out from
the tab.
TEL mute cable (Brown)
Power control/ Motor antenna
control cable (Blue/White)
8 6 4 2
7 5 3 1
8 6 4 2
7 5 3 1
— 20 —
Connect to the terminal that is
grounded when either the tele-
TEL MUTE
phone rings or during conversation.
Connect either to the power control
terminal when using the optional
power amplifier, or to the antenna
P.CONT.OUT
control terminal in the vehicle.