Switching Display For Discs - Kenwood KDC-8080R Instruction Manual

CD/External disc control features

Switching Display for Discs

Switch the display that appears whilst discs are playing.
Switching Display for Discs:
Each time you press the DISP button or CLK button, the
display during disc play switches as follows:
• During vertical division mode display
Upper part display
DISP button
Track Time
DNPS
Disc Title
Track Title
NOTE
• The same items cannot be selected for both the upper part
and the lower part.
• When the Black Mask function is turned on, the lower part
display shows the clock only.
Lower part display
CLK button
DNPS
Disc Title
Track Title
Spectrum Analyzer1
Spectrum Analyzer2
+ Clock
Spectrum Analyzer2
+ Graphic
Graphic + Clock
Date
• During horizontal division mode
Left side display
CLK button
Graphic
Spectrum Analyzer1
Spectrum Analyzer2
Spectrum Analyzer3
Analog clock
Digital clock
NOTE
This function cannot be operated whilst the Black Mask
function is on.
• During the full-screen display mode
The display is switched each time the CLK button is pressed.
NOTE
For information regarding the display items, refer to "Switching
Display" (page 10).
NOTE
• You can give names to discs through the presetting disc name
function (see p.28).
Note that depending on the unit, display may not be possible.
• If you try to display the name of a disc that does not have one,
"NO NAME" is displayed instead.
• When an attempt is made to display the title of a disc for which
a disc title/track title has not been recorded, the CD will display
"NO TEXT" , the MD player built into this unit will display "NO
TITLE" , and an MD changer will display "NO TITLE/NO NAME".
• Depending on the type of characters of the CD Text, some
characters may not be displayable.
— 26 —
Right side display
DISP button
Track number
Track Time
DNPS
Track Time
Track number
DNPS