Station Preset Memory; Switching Display For Tuner - Kenwood KDC-8080R Instruction Manual

Tuner features

Station Preset Memory

Store the frequency of the station currently being listened to.
You can then recall that station with a single touch of a button.
1
Select the band/ station that you want to have stored.
2
Hold down the button (#1-6) that you want to use for the
station, for two seconds or more.
The button number blinks once in the display to indicate that
the data has been stored.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
NOTE
You can store 6 stations in each of the FM1, FM2, FM3, and AM
(MW and LW) bands.

Switching Display for Tuner

You can change the display used when listening to the radio.
Changing the Display:
Pressing the DISP button or CLK button, the display switches
as follows:
• During vertical division mode display
Upper part display
DISP button
Programme Service name/
Station frequency
Radio text
NOTE
• The same items cannot be selected for both the upper part
and the lower part.
• When the Black Mask function is turned on, the lower part
display shows the clock only.
• During horizontal division mode
Left side display
CLK button
Graphic
Spectrum Analyzer1
Spectrum Analyzer2
Spectrum Analyzer3
Analog clock
Digital clock
— 18 —
Lower part display
CLK button
Radio text
Spectrum Analyzer1
Spectrum Analyzer2
+ Clock
Spectrum Analyzer2
+ Graphic
Graphic + Clock
Date
Right side display
DISP button
Programme Service name/
Station frequency
Band display
+ Preset station number