Tel Mute - Kenwood KDC-8080R Instruction Manual

• During vertical division mode display
The upper part display is switched each time the DISP button
is pressed.
The lower part display is switched each time the CLK button is
pressed.
Example: Tuner mode
Upper part display
DISP button
Programme Service name/
Station frequency
Radio text
NOTE
• The display items vary depending on the source that is
playing. For details refer to the "Switching Display" page for
source modes.
• The same items cannot be selected for both the upper part
and the lower part.
• When the Black Mask function is turned on, the lower part
display shows the clock only.
Lower part display
CLK button
Radio text
Spectrum Analyzer1
Spectrum Analyzer2
+ Clock
Spectrum Analyzer2
+ Graphic
Graphic + Clock
Date
— 11 —

TEL Mute

Shut down the audio system temporarily whenever an
incoming call is received.
NOTE
The function will not work if a cable is not connected to the car
phone.
When the telephone rings:
When a call is received, "CALL" is displayed and all the unit
functions are temporarily interrupted.
Restoring Original Unit Source During Phone Call:
Press the SRC button.
"CALL" disappears from the display, and the volume of the
original source is restored gradually.
Turning TEL Mute Function Off After Phone Call:
Hang the phone up.
"CALL" disappears from the display.
The original source (i.e., the one used before the phone call) is
returned to automatically, and the volume restored gradually.