Cd/External Disc Control Features Playing Cds; Playing Other Disc Mode; Switching Display For Discs - Kenwood DPX-4020 Instruction Manual

Double din sized cd/cassette receiver
Hide thumbs Also See for DPX-4020:
Table of Contents

Advertisement

CD/External disc control features
Playing CDs
Playing CDs:
If no CDs are inserted, insert one in the slot with the label
facing up.
If a CD is already inserted, press the SRC button repeatedly to
select the CD mode.
"CD" is displayed when the CD mode has been selected.
The CD will start playing.
The
indicator lights up when a CD has been inserted.
Pausing and Restarting CD Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
Stopping and Ejecting CDs:
Press the 0 button.
The CD stops playing and ejects from the slot.
2CAUTION
Do not attempt to insert a CD into the slot if another one is
already there.
NOTE
When you load a CD and eject it right away, the next time you try
to insert the CD may not load. In such a situation, take the CD
out for a moment and then reinsert it.

Playing Other Disc mode

This function permits the connection of optional players and
the playing of discs other than the loaded CD (in the current
unit).
Playing Discs:
Press the SRC button repeatedly to select the external disc
control mode.
The disc will start playing.
NOTE
The external disc control mode will differ, depending on the unit
that is connected.
Mode Display Examples
• "CD-CH"/"MD-CH"/"DISC-CH"...when a disc changer is
connected
• "CD-CH1", "CD-CH2"/"MD-CH1", "MD-CH2"/"DISC-CH1", "DISC-
CH2"...when two disc changers are connected
Pausing and Restarting Disc Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
NOTE
• When one disc has finished playing its last track, the next disc
in the changer will start playing. When the last disc in the
changer has finished, the player will return to the first disc and
start playing it.
• Concerning the display during MD play
If the playtime goes beyond a 100 minutes, the last 2 digits of
playtime are displayed.
If the MD-LP recording format is "LP2" the
light is ON, if it's "LP4" the

Switching Display for Discs

Switch the display that appears while discs are playing.
Switching Display for Discs:
Each time you press the DISP button, the display during disc
play switches as follows:
— 18 —
indicator
indicator light is ON.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dpx-4020ph4Dpx-4020mh4Dpx-5030Dpx-5050

Table of Contents