Switching Display For Discs; Track Search; Direct Track Search; Disc Search - Kenwood KDC-PS907 Instruction Manual

Disc changer control features

Switching Display for Discs

Switch the display that appears while discs are playing.
Switching Display for Discs:
Each time you press the DISP button, the display during disc
play switches as follows:
▼
Track time
▼
Total disc playing time (CD only)
▼
Disc name
▼
Disc title (MD only)
▼
Track title (MD only)
NOTE
• You can give names to discs through the presetting disc name
function (see p. 27).
• If you try to display the name of a disc that doesn't have one,
"NO NAME" is displayed instead.
• When the source you are listening to is finished or interrupted
(ex. switching the ignition position, changing the sources), the
initial display will return.

Track Search

Search forward or backward through the tracks on the disc
until you reach the one that you want to listen to.
Making a Reverse Track Search:
Press the 4 button to display the desired track number.
Press once to search back to the beginning of the current
track, twice to search back to the beginning of the previous
track, and so forth.
Play starts at the beginning of the displayed track number.
NOTE
Pressing the 4 button while listening to track 1 will only search
back to the beginning of that track. The reverse search is not
24
(See page 10)
Making a Forward Track Search:

Direct Track Search

Using the remote, directly input the track number that you
want to listen to.
1
2
Canceling Direct Track Search While It Is Operating:

Disc Search

Search forward or backward through the discs in a disc
changer.
Making a Reverse Disc Search:
"recycled" to the last track on the disc.
Press the ¢ button to display the desired track number.
Press once to fast forward to the next track, twice to fast
forward to the track after that, and so forth.
Play starts at the beginning of the displayed track number.
NOTE
You cannot make a forward track search when listening to the
last track on a disc.
Using the number buttons on the remote, input the number of
the track that you want to listen to.
The selected track number will blink in the display for 10
seconds.
If you make no further input in the 10-second period, the
number entry mode will automatically be canceled.
+
Press either the TRACK or TRACK
number is blinking.
The track starts playing.
Press the 38 button.
NOTE
You cannot use the direct track search function while doing track
or disc scans or using random or magazine-random play.
–
Press the DISC button to display the desired disc number.
Function of Remote (See page 11)
–
button while the track