Speaker & Woofer Setting; Switching Display Type - Kenwood z838w Manual

General features
Speaker & Woofer Setting
Speaker setting allows the System Q settings to be fine-tuned
according to the type of speakers.
Woofer setting allows for Network configuration according to the
type of subwoofers.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker & Woofer Setting mode
Press the [Q] button.
"Speaker Setting" is displayed.
3
Select the Setting mode
Press the [FM] or [AM] button.
Each time the button is pressed it switches between Speaker
setting mode and Woofer setting mode.
4
Select the Speaker and Woofer type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
In Speaker setting mode
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
In Woofer setting mode
Woofer type
OFF
12 in. A type
10 in. A type
12 in. B type
10 in. B type
12 in. C type
10 in. C type
8 in. type
12 in. D type
10 in. D type
5
Exit Speaker & Woofer Setting mode
Press the [Q] button.

Switching Display Type

Setting the Display type.
Press the [DISP] button.
Each time the button is pressed the Display type switches as
Display
shown below.
"OFF"
Display
"5/4 inch"
"6 9/6inch"
*
"O.E.M."
"Display Type D"
"Display Type A"
— 12 —
Display
"Woofer OFF"
"12in type A"
"10in type A"
"12in type B"
"10in type B"
"12in type C"
"10in type C"
"8inch"
"12in type D"
"10in type D"
Display mode
Picture
Character
information display