Follett Maestro Chewblet 400 Series Installation & Service Manual page 12

19. Remove lid from dispenser top (Fig. 12.1). Remove the
knockout from the Harmony top (Fig. 12.2) corresponding to
selected chase location. Line the edges of the opening with
the supplied gasket material (Fig. 12.2).
20. Follow the "RIDE model ice machine installation procedure"
found in the Symphony MCD400 Ice machine Manual
208600 to install your Follett ice machine.
21. Route the bin signal cord from the 4" x 4" (102mm x 102mm)
junction box through the top knockout (Fig. 12.2) and
countertop hole. Attach the bin signal connector to the two
lead plug on the ice machine.
22. Route the ice transport tube(s) from the ice machine (or
evaporator module) through counter cutout and knock out
into dispenser top by following the same routing as the bin
signal cord (Fig. 12.2).
Fig. 12
1
12
1
2
2
1
2