Follett Maestro Chewblet 400 Series Installation & Service Manual page 11

RIDE model ice machine installation
18. Ice transport tube chase may be located behind
or to either side of the dispenser (Fig. 9 and 10).
Using the chase mounting bracket as a template
mark the counter for the ice transport tube(s)
in one of the locations shown in Fig. 9 and 10.
Within the template outline drill one 2.25" (58mm)
to 2.375" (61mm) hole for each ice transport
tube. Secure the chase mounting bracket to the
counter using supplied screws (Fig. 11).
Single tube – Fig. 9
22" (559mm) dispenser
30" (762mm) dispenser
Double tube – Fig. 10
22" (559mm) dispenser
30" (762mm) dispenser
Dimension A Dimension B
11.00" (280mm) 8.00" (204mm)
15.00" (381mm) 12.00" (305mm)
9.50" (242mm) 8.00" (204mm)
13.50" (343mm) 12.00" (305mm)
Fig. 9 – Single ice tube dispensers
A
1.25" (32mm)
1.25
(32mm)
Fig. 10 – Double ice tube dispensers
A
1.25" (32mm)
1.25
(32 mm)
Fig. 11
11
rear entry chase
B
6"
(153mm)
2.25" (57mm) -
1.25"
2.375" (61mm)
(32mm)
dia. hole
typical
front
rear entry chase
B
6"
(153 mm)
2.25" (57 mm) -
1.25"
2.375" (61 mm)
(32 mm)
dia. hole
typical
front