Table of Contents
Advertisement
Quick Links
Follett Maestro
for Remcor/Cornelius Countertop ice and beverage dispensers
Order parts online
www.follettice.com
Installation, Operation and Service Manual
Following installation, please forward this manual
to the appropriate operations person.
801 Church Lane • Easton, PA 18040, USA
Toll free (800) 523-9361 • (610) 252-7301
Fax (610) 250-0696 • www.follettice.com
™
Chewblet
Icemaker and Top Kit
®
400 Series
00117259R04
Advertisement
Table of Contents
Related Manuals for Follett 400 Series
Summary of Contents for Follett 400 Series
- Page 1 801 Church Lane • Easton, PA 18040, USA Toll free (800) 523-9361 • (610) 252-7301 Fax (610) 250-0696 • www.follettice.com ™ Chewblet Icemaker and Top Kit Installation, Operation and Service Manual to the appropriate operations person. ® 400 Series 00117259R04...
-
Page 2: Table Of Contents
3. Follett receives the equipment at the factory in Easton, PA within 30 days after issuance of the return authorization number. 4. The equipment must be returned in Follett packaging. If the packaging has been damaged or discarded, Follett will forward, at the customer’s expense, new packaging. -
Page 3: Welcome To Follett Corporation
Before you begin After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If damage is found, notify the shipper immediately and contact Follett Corporation so that we can help in the filing of a claim, if necessary. -
Page 4: Specifications
Separate drains for icemaker and condenser. To prevent back flow, do NOT connect drains. • Follett recommends installation of a Follett water filter system (part# 00130229) in icemaker inlet water line Field Wiring: countertop dispensers with Satellite-fill icemakers Consult enclosed D400A/W, R400A/W, MCD400A/W manual. - Page 5 Dimensions and clearances Required clearances – MCD400 series Entire front of icemaker clear of obstruction/connections to allow removal. 12" (305mm) above icemaker for service 6" (153mm) minimum between louvered (exhaust) side of icemaker and any adjacent equipment. MCD400AHS – 18" (457mm) minimum, 10 ft (3m) maximum between discharge and air intake grilles. Front view —...
-
Page 6: Installation
Installation 1. Install Cornelius ice dispenser according to manufacturer’s specifications. Note: We recommend that the dispenser back be mounted at least 1" (26mm) from wall to allow water, drain and electric lines from top-mount icemakers to be concealed behind dispenser. 2. - Page 7 7. Remove existing plastic top from dispenser and install supplied gasket around perimeter of dispenser top (Fig. 3). Note: Sanitize dispenser before proceeding. 8. Install supplied stainless steel top with access opening toward front of dispenser (Fig. 4). For dispensers with top mounted icemakers Proceed with steps 9 through 17.
- Page 8 Top mounted icemaker installation 9. Position Follett MCD400AHT icemaker on perimeter gasket of stainless steel top. Icemaker should be oriented with A/C condenser facing front (Fig 5). Fig. 5...
- Page 9 Note: Follett recommends the installation of a Follett water filter system (par# 00130229) on supply water inlet. Fig. 6 grille Fig.
- Page 10 13. Remove icemaker top panel and louvered side panel. 14. Insert ice transport tube to a 1/2" (13mm) depth through mounting bracket (Fig 8 and 9.1) and secure transport tube away from condenser fan under float reservoir bracket (Fig. 9.2). 15.
- Page 11 Satellite-fill icemaker installation 18. Ice transport tube chase may be located behind or to either side of the dispenser (Fig. 10 and 11). Using the chase mounting bracket (Fig. 12) as a template mark the counter for the ice transport tube(s) in one of the locations shown in Fig.
- Page 12 20. Follow the “Satellite-fill icemaker installation procedure” found in the Symphony MCD400 Icemaker Manual 208600 to install your Follett icemaker. 21. Route the bin signal cord from the 4" x 4" (102mm x 102mm) junction box through the top knockout (Fig. 13.1) and countertop hole.
- Page 13 23. Connect the ice transport tube(s) to the dispenser: a) Drill 3/16" (5mm) holes through both sides of the tube 1/2" (13mm) from the tube end. b) Collapse tube and insert through gasketed hole (Fig. 14.1). c) Match tube holes to bracket tabs. 24.
-
Page 14: Operation
200ppm of Ecolab Mikro-chlor Cleaner or equivalent 5.25% sodium hypochlorite solution. Solution B – Ice machine cleaner: Prepare one gallon (3.8L) ™ of Follett SafeCLEAN Ice Machine Cleaner (one 7 oz packet) or equivalent. Solution temperature must be at least 120° F (48.9° C). - Page 15 17. Rinse ice compression nozzles (Fig. 17.1) with water and reinstall. 18. Drain any remaining sanitizing solution from reservoir through float/evaporator drain line (Fig. 16.1). 19. Fill reservoir (Fig. 16.2) with 120˚F (49˚C) water. Empty water through float/evaporator drain line (Fig. 161). Repeat 3 times. 20.
-
Page 16: Replacement Parts
Service Replacement parts Top kit models MTC22SC, MSC22SC Reference # Description Base, top mount Base, Satellite-fill Cabinet Cover Chase, upper Chase, lower Collar Deflector, single Lid, access Box, thermostat Gasket, top, Harmony Gasket, ice entry Socket, bin signal Kit, ice entry, MCD400 Plate, ice tube mounting, MCD400 Not shown Thermostat, bin level... -
Page 17: Models Mtc24Sc, Msc24Sc
Top kit models MTC24SC, MSC24SC Reference # Description Base, top mount Base, Satellite-fill Cabinet Cover Chase, upper Chase, lower Collar Deflector, single Lid, access Box, thermostat Gasket, top, Harmony Gasket, ice entry Socket, bin signal Kit, ice entry, MCD400 Plate, ice tube mounting, MCD400 Not shown Thermostat, bin level Not shown... -
Page 18: Models Mtc30Sc, Msc30Sc
Top kit models MTC30SC, MSC30SC Reference # Description Base, top mount Base, Satellite-fill Cabinet Cover Chase, upper Chase, lower Collar Deflector, single Lid, access Box, thermostat Gasket, top, Harmony Gasket, ice entry Socket, bin signal Kit, ice entry, MCD400 Plate, ice tube mounting, MCD400 Not shown Thermostat, bin level Not shown... -
Page 19: Model Msc44Sc
Top Kit models MSC44SC Reference # Description Base, Satellite-fill Cabinet Cover Chase, upper Chase, lower Collar Deflector, single Lid, access Box, thermostat Gasket, top, Harmony Gasket, ice entry Socket, bin signal Not shown Thermostat, bin level Not shown Diverter, ice Not shown Plate, blank, ice entry Part #... - Page 20 Chewblet is a registered trademark of Follett Corporation, registered in the US. 801 Church Lane • Easton, PA 18040, USA Toll free (800) 523-9361 • (610) 252-7301 00117259R04 Fax (610) 250-0696 • www.follettice.com 09/05...