Traffic Information; Switching Display; Switching To The Fm/Am List Screen; Switching To The Pty Search Screen - Kenwood KVT-M700 Instruction Manual

Control Screen -2
T I M E N U
T U N E R
F M 3 P 1
F M - I N F O
MANU
CRSC
A M LIST
INFO
AME SEEK

Traffic Information

Switching to traffic information automatically when a
traffic bulletin starts even when you aren't listening to
the radio.
Touch the [TI] button.
Each time the button is touched the Traffic Information
function turns ON or OFF.
When it's ON, "TI" indicator is ON.
When a traffic bulletin starts, "TRAFFIC INFO" is
displayed it and it switches to traffic information.
During reception of a AM station when the Traffic
Information function is turned ON, it switches to a FM
station.

Switching Display

Switching the information displayed.
Touch the [DISP] button.
Each time the button is touched the display switches as
shown below.
Information
SNPS or Program Service name "STATION NAME"
Radio text
Switching to the Radio Text Information Screen
The whole sentence of radio text is displayed.
Touch the [INFO] button.
R A D I O - T E X T
# # # # # # # # # # # # # # # # # # #
# # # # # # # # # # # # # # # # # # #
# # # # # # # # # # # # # # # # # # #
# # # # # # # # # # # # # # # # # # #
# # # # # # # # # # # # # # # # # # #
# # # # # # # # # # # # # # # # # # #
# # # # # # # # # # # # # # # # # # #
# # # # # # # # # # # # # # # # # # #
# # # # # # # # # # # # # # # # # # #
# # # # # # # # # # # # # # # # # # #
# # # # # # # # # # # # # # # # # # #
I N F O
Page Up/Down for the Radio text
Touch the [5] or [∞] button.
When all text are displayed on the information screen, [∞]
and [5] do not appear.
Exit the Information Screen
Touch the [RTN] button.
Return to the source control screen.
1 2 : 0 0
1 0 8 . 5 M Hz
TI
RDS ST
F M
PTY
NAME CRSC DISP
Display
"RADIO-TEXT"
RTN

Switching to the FM/AM List Screen

Touch the [LIST] button. (☛ page 22)

Switching to the PTY Search Screen

Touch the [PTY] button. (☛ page 22)
This function can't be used during a traffic bulletin or AM
reception.

Switching to the Name Set Screen

Touch the [NAME] button.
For the setting method refer to the name set screen
(☛ page 28).
You cannot operate unless the parking brake is set.
21