9.05
Removing /inserting the bobbin case
2
Fig. 9 - 05
9
Threading the bobbin case / adjusting the thread tension
.06
Fig. 9 - 06
Do not operate the machine when the cover of the hook compartment is open!
Danger of injury by moving parts!
1
Turn the machine off!
Danger of injury if the machine
is started accidentally!
Removing the bobbin case:
Raise take-up lever as far as possible.
Open the cover of the hook
compartment, raise latch 1 and remove
1
bobbin case 2.
Inserting the bobbin case:
Insert bobbin case 2 so that it clicks into
place.
Close the latch 1 and close the cover of
the hook compartment.
Turn the machine off!
Danger of injury if the machine
is started accidentally!
Thread the bobbin as shown in Fig. 9-06.
When the thread is pulled, the bobbin
must rotate in the direction of the arrow.
Adjust the bobbin thread tension with
screw 1.
+
-
Setting up
9 - 4