Fitting The Tilt Lock; Installation And Commissioning - Pfaff 242 Service Manual

8 Mounting the lower V-belt guard
.01.04
Fig. 8 - 04
8 Fitting tilt lock
.01.05
2
Fig. 8 - 05

Installation and commissioning

1
1
Align belt guard 1 in such a way that both
the motor pulley and the V-belt run
freely.
Fig. 8-04 shows a Quick motor.
If another motor is used,
proceed as described in the
motor's instruction manual.
Attach tilt lock 1 included in the
accessories with screw 2.
Do not operate the machine
without tilt-over safeguard 1!
Danger of crushing between
upper part and the table top!
8 - 3