Installation and commissioning
8
Fitting the synchronizer
.01.06
8
Fitting the reel stand
.01.07
8 - 4
2
Fig. 8 - 06
Fig. 8 - 07
Slide synchronizer 1 onto the shaft.
Slightly tighten screws 2.
Insert plug of the synchronizer into the
control box.
Adjust synchronizer (see Chapter
11.05.16 Adjusting the synchronizer).
1
Fitting the reel stand as shown in
Fig. 8-07.
Insert reel stand in the table-top hole and
fasten it with the included nuts.