9
Removing / inserting the bobbin case
.03
Fig. 9 - 04
9
Inserting the bobbin case / adjusting the bobbin thread tension
.04
Fig. 9 - 05
1
2
Do not operate the machine with an hook area cover!
Risk of injury due to moving parts!
1
Removing the bobbin case:
Bring the take-up lever to its top position.
Open the hook area cover, raise the lever
1 and remove the bobbin case 2.
Inserting the bobbin case:
Press the bobbin case 2 until you feel it
snap into the bobbin case base.
Move the lever 1 and close the hook
area cover.
Insert the bobbin as shown in Fig. 9 - 05.
When the thread is drawn off, the bobbin
must turn in the direction shown by the
arrows.
Adjust the thread tension by turning the
screw 1.
+
-
Set-up
Switch off the machine!
Risk of injury due to accidental
machine start-up!
Switch off the machine!
Risk of injury due to accidental
machine start-up!
29