Engaging Solenoid - Pfaff 242 Service Manual

Adjustment
11

Engaging solenoid

.05.04
11 - 27
Requirement
In needle rise position and with engaging solenoid 5 activated, there must be a distance
of 0.3 mm between engaging lever 2 and pawl 3.
3
2
Fig. 11 - 25
Bring the machine to needle rise position by turning the balance wheel.
Loosen screw 1 until the engaging solenoid can be turned with difficulty.
Manually activate engaging lever 2 2 2 2 2 so that pawl 3 engages.
Press solenoid planger 4 as far as possible into solenoid housing 5 and move both the
solenoid housing and the solenoid planger in accordance with the requirement.
In this position tighten screw 1.
4
5
1
5