Table of Contents
Advertisement
MIDI Controller
(MIDI Keyboard, Sequencer, etc.)
E-MU SYSTEMS, INC.
Scotts Valley, California U.S.A.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
100-250VAC 50/60 Hz ~
THIS PRODUCT TO RAIN OR MOISTURE.
Male RCA plug
to
Male Phono Plug
Aux. or
Tape In
Home Stereo
System
MIDI In
Vintage Keys is controlled by MIDI messages received at the MIDI
In connector. Connect the MIDI In of the Vintage Keys to the
MIDI Out connector of a MIDI controller such as a MIDI key-
board, MIDI wind controller or MIDI guitar controller.
Outputs
Vintage Keys is a high quality, stereo audio device. In order to
reproduce its wide dynamic range and frequency response, use a
high quality amplification and speaker system such as a keyboard
amplifier or home stereo system. A stereo setup is highly desirable
because of the added realism of stereophonic sound. Headphones
can be used if an amplifier and speaker system is not available.
Plug stereo headphones into the headphone jack located on the
left side of the front panel. The Right Main output jack serves as a
mono output when the Left Main plug is not plugged in.
SETUP #1 BASIC SETUP
MIDI Out
MIDI
IN
OUT
THRU
To
Main Outs
CONNECTION INSTRUCTIONS
The Headphone
Output is located
on the Front Panel
OUTPUTS
R - SUB2 - L
R - SUB1 - L
R - MAIN - L
MONO
STEREO
Mixer
Amp
Speakers
Home Studio
System
Chapter 1: Basic Setup
The headphone output
monitors the main outputs
only.
The submix outputs do NOT
feed into the headphone
output.
• • • If Vintage Keys does not
seem to be responding
correctly, make sure the both
Vintage Keys and your MIDI
controller are set to the same
MIDI channel.
5
Hide quick links:
Advertisement
Table of Contents
