Crossfade Direction - E-Mu Vintage Keys Operation Manual

EDIT MENU
••• A Crossfade Balance
setting of 000 would be
appropriate with a source
such as a modulation wheel
or footpedal, either of which
can only change the value in
a positive direction.
Crossfade must be as-
signed to a modulation
source in the Realtime or
Velocity modulation screens.

• Crossfade Direction

This function determines the polarity of the crossfade or cross-switch.
The direction is either primary
• Crossfade Balance
The crossfade balance parameter determines the initial balance be-
tween the primary and secondary layers. Higher values shift the bal-
ance to the secondary instrument. When the Crossfade Direction is
Pri->Sec, Modulation subtracts from the primary volume and adds to
the secondary volume. When crossfade modulation and balance equal
64, the two instruments are at equal volume.
PRIMARY
AMOUNT
Primary
INPUT
0
In the example above, crossfading between Primary and Secondary instruments will
occur between the values of 12 and 52. Above and below these points, the output
will be completely Primary or Secondary.
54 Vintage Keys Operation Manual
secondary, or secondary
XFADE DIRECTION
Pri -> Sec
XFADE BALANCE
064
CROSSFADE
CROSSFADE
BALANCE
32
Equal
Only Amount
12 32 52 64
CROSSFADE
AMOUNT
40
primary.
SECONDARY
AMOUNT
Secondary
Only
96 128