Midi Implementation Chart - E-Mu Vintage Keys Operation Manual

MIDI IMPLEMENTATION CHART

Function...
Basic Default
Channel Changed
Mode Default
Messages
Note
Number True Voice
Velocity Note ON
Note OFF
After Keys
Touch Channels
Pitch Bender
Control Change
Program
Change True Number
All Sound Off
All Notes Off
Reset All Controllers
System Exclusive
System :Song Pos
Common :Song Sel
:Tune
System :Clock
Real Time :Commands
Aux :Local On/Off
Messages :Active Sense
:Reset
Notes:
Pan 0=hard left
Mode 1: OMNI ON, POLY
Mode 3: OMNI OFF, POLY
GENERAL INFORMATION FOR VINTAGE KEYS SYSEX
• Product ID for Vintage Keys is 0A.
• Device ID is [00-0F] (0-15 decimal).
• Parameter Number and Parameter Value are 2 bytes each.
• Since MIDI data bytes cannot be greater than [7F] (127 decimal), the
data values are "nibble-ized" to a 14-bit signed 2's complement format.
• There is only one edit buffer which is for the current preset (the
preset shown in the display). Only one preset at a time can be edited
via SysEx commands and changing the current preset erases the edit
buffer.
102 Vintage Keys Operation Manual
Transmitted Recognized
No 1
No 1-16
Yes Mode 1, 3, 4
MONO, POLY
OMNI, ON/OFF
No 0-127
No 0-127
No Yes
No No
No Yes
No Yes
No Yes
No Yes
No Yes 0-127
No Yes 0-127
No Yes
No Yes
No Yes
Yes Yes
No No
No No
No No
No No
No No
No No
No No
No No
127=hard right
Mode 2: OMNI ON, MONO
Mode 4: OMNI OFF, MONO
Remarks
Memorized
Memorized
v=1-127
0-31 64-79