E-Mu Vintage Keys Operation Manual page 84

You have just connected the Auxiliary Envelope Generator to the
Filter Cutoff as shown in the diagram below.
Instrument
Tone
Now go back to the Aux Envelope screen shown below.
Move the cursor underneath the envelope amount and change the
value to about +100. Now when you press a key the filter will slowly
sweep up. Because the filter Q is set high, you can hear the different
harmonics of the sound being accentuated as the filter cutoff sweeps
past.
Now, scroll back to the Auxiliary Envelope parameter screen.
Change the attack rate and note the change in the sound. The dia-
gram below shows approximately how the envelope looks when the
parameters are set as shown above.
Low Pass
DCA
Filter
Fc Q
Aux. AHDSR
AUX ENV AMT DLY
+000 000
A: A H D S
15 00 00 99 50
Sustain Level
time
PRACTICE PROGRAMMING
Pan
R
Chapter 6: Practice Programming
R
L
••• Note that all the enve-
lope parameters are Rates
except for Sustain, which is
a Level.
75