Downtimer [Timer - Suunto D3 Instruction Manual

2.4.3 DOWNTIMER [TIMER D]
The downtimer function is entered by pressing
the S button twice, when the time keeping display
is shown. The text Timerd at the bottom and the
mode indicator (TIME) on the left side of the
display indicate that you have entered the
Downtimer [TIMEr d] function (Fig.2.8).
The watch shows the preset time set in the SET
mode (See Chapter 4.3 Timer Settings). Use the +
and - buttons as in the [TIMEr Up] function.
When the countdown finishes the watch gives
three beeps and returns to showing the pre-set
time (Fig. 2.9). If the downtimer has been set for
a continuous countdown, the watch begins a new
countdown after the previous one automatically.
Diving with the D3 or performing data transfer
will stop the downtimer. However, it is possible to
use downtimer function normally, if the GAUGE
and the FREE diving modes are disabled (set to
OFF, see chapter 4.4.) In dive mode the
downtimer cannot be operated.
SuuntoD3.p65 17
Fig. 2.8. The Downtimer of the
Stopwatch is indicated by the
TIMEr d text and a mode
indicator.
Fig. 2.9. The Downtimer counts
down from a pre-set time and
the DT mode indicator flashes.
17
31.1.2002, 14:17