Dive Mode Settings [Dive]; Set Gauge Mode - Suunto D3 Instruction Manual

While the enable/disable status [On/OFF] is
selected (blinking) press + or - to change the status.
5. After setting the downtimer, press the M button
to save the settings and return to setting mode.

4.4. DIVE MODE SETTINGS [DIVE]

In this mode you can select the type of dive mode
Fig. 4.10. Dive Setting Mode.
to be used (Gauge or Free) or turn the dive modes
OFF. If the dive modes are turned OFF, the dive
computer functions are disabled, thus turning the
D3 into a mere water resistant sportswatch.
NOTE: If the DIVE Mode is disabled (set to OFF),
the instrument will not activate the selected diving
mode (Gauge, Free) when submerged. Turning the
dive modes OFF enables the use of stopwatch and
downtimer functions underwater.

4.4.1. SET GAUGE MODE

To set the Gauge Mode:
1. In the Setting Mode, press S four (4) times to
select the Dive Setting Mode (Fig. 4.10.).
2. Wait two seconds until the Dive Setting Mode
Fig. 4.11. Set Gauge/Free mode.
Enable/disable status blinks. activates automatically. The enable/disable status
42
SuuntoD3.p65 42 31.1.2002, 14:17