Surface Interval After Agauge Dive - Suunto D3 Instruction Manual

Whenever the SLOW warning segment appears
(Fig. 3.20.), you should immediately slow down
your ascent.
NOTE: The Ascent Rate indicator is available in
Gauge Mode only.
Fig. 3.20. Ascent Rate Indicator.
Do not exceed the maximum ascent rate!
Blinking SLOW and four
Rapid ascents increase the risk of injury.
segments are shown together
with an audible alarm. Ascent
Rate is more than 10 m/min
[33ft/min].
3.3.5. SURFACE INTERVAL AFTER A
GAUGE DIVE
An ascent to any depth shallower than 1.2 m [4
ft] will cause the DIVING display to be replaced
by the alternating SURFACE displays, giving the
following information (Fig. 3.21.):
Fig. 3.21. Surface display. You
have surfaced from a 44 minute
dive, which had a maximum
depth of 17.1m [ft].
32
SuuntoD3.p65 32
WARNING
• maximum depth of most recent dive in
meters [ft]
• present depth in meters [ft]
• the surface time in hours and minutes
(separated by a colon), telling the
duration of the present surface interval
31.1.2002, 14:17