Presetting Time Alarm; Presetting Dive Alarms; Bookmark Function - Suunto D3 Instruction Manual

The displays can be preset in the Surface Mode. If it is not active, enter it by
selecting the Dive Mode. The preset display will remain active until another
display is selected. The preset displays will be the default displays in the
Diving Mode. The other available display can be accessed by pressing the + or
- button. After five seconds the display changes back to the default preset
display automatically.

3.1.3.1. PRESETTING TIME ALARM

The alarm clock is set in the Setting Mode, ALM. For further information
see chapter 4.2.

3.1.3.2. PRESETTING DIVE ALARMS

The dive alarms (dive time alarm and maximum depth alarm) are set in the
Setting Mode, DIVE AL. For further information see chapter 4.5.

3.1.4. BOOKMARK FUNCTION

It is possible to make special marks in the profile memory during a dive.
These Bookmarks will be shown as a Diver Attention Symbol when scrolling
the profile memory on the computer display (Fig. 3.8). The Bookmarks
will also be shown as annotations in the PC-software, Suunto Dive Manager.
To make a bookmark on the profile memory during a dive press the S
button. The Diver Attention Symbol will be displayed to confirm the
bookmark. Pressing the bookmark function will also reset the dive timer in
the middle display.
23
SuuntoD3.p65 23 31.1.2002, 14:17