Gauge Diving; Maximum Operating Depth Planner [Mod] - Suunto D3 Instruction Manual

3.3. GAUGE DIVING

3.3.1 MAXIMUM OPERATING DEPTH
PLANNER [MOD]
The MOD planner allows a diver using air, nitrox
or trimix mixes to determine the maximum depth
at which the gas is breathable within selected PO
Fig. 3.15. Maximum Operation
limits.
Depth Planner. The Planning
mode is indicated by the Mod
It is possible at any time in the Gauge Surface
text and mode indicators.
Mode to enter the MOD planner, simply by
pressing the S button. After showing the text
MOD and the plan indicator (Fig. 3.15.), the
display will show the Maximum Operating Depth
(MOD) value corresponding to the selected O
and PO
To use the MOD planner:
1.In the Gauge Surface Mode, press the S button
to select the MOD planner.
2. Wait two seconds until the MOD calculator
activates automatically. The oxygen level starts
to blink on the display (Fig. 3.16.).
Fig. 3.16. The Gauge Mod shows
the Maximum Operating Depth
3.Press the S to change the selection in the
and the corresponding O % and
2
PO values. following sequence: ->O
2
28
SuuntoD3.p65 28
%
2
levels (Fig 3.16.).
2
% level ->PO level
2 2
31.1.2002, 14:17
2