At this time, perform your pre-check making sure
that:
Fig. 3.5. Startup III. Surface
Mode (Gauge). Depth and dive
time are zero. Pressing +/-
button activates alternate dis-
play of maximum depth and
The D3 is now ready for diving.
current time.
NOTE: The surface interval time does not run
before the first dive.
After activation of the Dive Mode or after diving,
the D3 will automatically switch to show the time
keeping display within 5 minutes in Gauge Mode
and 10 minutes in Free Mode to conserve the
battery power, if you do not press any buttons.
3.1.2. BATTERY POWER INDICATOR
AND LOW BATTERY WARNING
Fig. 3.6. Startup IV. Free mode.
Depth and dive time are zero.
This dive computer has a unique graphic Battery
Pressing +/- button activates
altrernate displays.
Power Indicator designed to give you an advance
20
SuuntoD3.p65
20
•
the D3 operates and provides a complete
display
•
the low battery indicator is not on
•
the instrument displays correct units
•
the instrument displays correct tempera-
ture and depth (0.0 m [0 ft])
•
the buzzer beeps
•
you have preset desired displays on the
User Definable Display Field
31.1.2002, 14:17