Front Panel - Encore N300 User Manual

1.3

Front Panel

Note: When the Extender is turned on, the POWER LED lights up and the SYSTEM and WPS
LEDs stay on for 8 seconds to indicate that the system is starting up.
Item
1 POWER LED
2 SYSTEM LED
3 LAN LED (1)
4 WLAN LED
LAN LED
5
(2/3/4/5)
6 WPS LED
7 WPS Button
Status
The Extender power is on.
On
The Extender power is off.
Off
Slow Blinking The Extender is ready to work.
LAN port is successfully connected.
On
The Extender is sending or receiving data
Blinking
over the wired network.
Slow Blinking Wireless network is ready.
The Extender is sending or receiving data
Blinking
over the wireless network.
LAN port is successfully connected.
On
The Extender is sending or receiving data
Blinking
over the wired network.
The WPS PBC/PIN function is not running.
Off
The WPS PBC function is enabled. Turns off
after 2 minutes when no connection is
Slow Blinking
established.
Press and hold for 3 seconds to enable the
WPS (Wi-Fi Protected Setup) function.
5
www.encore-usa.com
Description