5.1.3 Wi-Fi Protected Setup
The Wi-Fi Protected Setup screen enables users to configure the Wi-Fi Protected Setup
(WPS) function. WPS allows WPS-enabled clients to join the network even without
knowing the SSID and security key.
WPS — Select Enable to enable the WPS (Wi-Fi Protected Setup) function.
Status — Display the status information of WPS: UnConfigured or Configured.
Self-PIN Number — Display the current PIN number of the Extender.
Client PIN Number — Enter the client PIN number to negotiate with the Extender via
WPS connection. A client can be a network card, IP camera, and etc. Click the Start PIN
button for the Extender to start searching for the client.
Push Button Configuration: The Push Button Configuration (PBC) method allows
WPS-enabled devices to join the network with a push of a button. Click the Start PBC
button and then push the button on the device to establish connection.
35
www.encore-usa.com