Encore N300 User Manual page 30

Encryption Type — Select TKIP, AES, or Auto encryption.
Note: TKIP is available for B or G WLAN band only. The WLAN Band setting is under
Wireless > Advanced menu.
Passphrase and Confirmed Passphrase — Enter a passphrase with at least 8
characters.
WPA / WPA2 / WPA2-Auto with EAP
C.
Select EAP (Extensible Authentication Protocol) if a Radius server is connected in the
wireless network.
Encryption Type — Select TKIP, AES, or Auto encryption.
Note: TKIP is available for B or G WLAN band only. The WLAN Band setting is under
Wireless > Advanced menu.
Radius Server 1 — Enter the following information:

IP Address: The IP address of the authentication server.

Port: The port number used to connect to the authentication server.

Shared Secret: The secret passphrase to connect to the authentication server.
WDS Security — Select Enable to prompt users to enter a security key before allowing
access to the wireless network.
WDS Auth Type — Select the type of security to use: WEP or WPA2.
29
www.encore-usa.com